OLYMPUS DIGITAL CAMERA

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor’s TEDS memory stores information about calibration factor limiting the risk of configuration errors. The accelerometer is supplied with three different diameter fixing clamps to conveniently match the grip of the vibrating tool being measured. SV 150 offers more robust and lower cost alternative to a traditional piezo-electric accelerometer.

 

SV 150 Hand-arm Triaxial Accelerometer Specification

Performance

Number of axis 3
Sensitivity (± 5 %) 0.661 mV/ms-2 at 79.58 Hz
Measurement range 2000 ms-2 PEAK
Frequency response 0 Hz ÷ 1500 Hz
Resonant frequency 16.5 kHz (MEMS transducer)
Electrical noise < 0,14 ms-2 RMS, Wh weighting
Force range n/a

Electrical

Supply current < 5.0 mA
Supply voltage 3.3 V ÷ 5.5 V
Bias voltage 1,5 V ± 0.1 V
Output impedance 51 Ohms
Charge/discharge time constant 30 sec. typ
TEDS memory installed (power supply pin)

Environmental Conditions

Maximum vibration 100 000 ms-2 shock survival
for MEMS
Temperature coefficient <+/-0.02 %/°C
Temperature from -10°C to +50°C
Humidity up to 90 % RH, non-condensed

Physical

Sensing element MEMS
Cable integrated 1.4 meters
Connector LEMO 5-pin plug (SV 106 compatible)
Dimensions 15.5mm x 15.5 mm x 15.5mm
Weight 20 grams (without cable)

Accessories

Calibration adapter SA 155 (option)

Datasheet: SV150